Rolvenden village hall boiler upgrade

View Case Study

The Smallhythe Project

We were asked to come up with a solution for a grand old house with an antiquated plumbing and heating system.
The first thing to do was to split up the heating system into upstairs and downstairs heating zones along with the underfloor zones, each zone had a thermostat and zone valve installed to control the heat, two new grant vortex blue flame boilers were installed along with Grundfos pumps, Honeywell controls and a custom copper low loss header. The next task was to remove the water tanks in the loft and the old low pressure (gravity) hot water cylinder in the airing cupboard.
View Case Study

Risden Project

New Vaillant boiler with an unvented mains pressurised hot water cylinder
Our client came to us having purchased a beautiful barn conversion, unfortunately the existing system was letting the property down with poor water pressure and lack lustre heating from a combi boiler. The boiler was under powered for the property and if someone was trying to shower no one else could open a tap as the pressure and temperature in the shower would fluctuate too much. They were even topping up the bath from the kettle.
View Case Study

Dungeness lighthouse cottage project

As part of a full refurbishment of a beautiful old lighthouse cottage we were asked to design and install a plumbing and heating system to serve traditional column radiators and 2 bathrooms.
View Case Study

The Golford Project

Update of an old overcomplicated and unreliable system with pipework upgrades, new oil boiler and unvented pressurised hot water cylinder
View Case Study
Call us 01580 242 801
Emergency Callouts 07711 597 584
Registered Address Chitcombe Manor, Chitcombe Rd, Broad Oak, Brede, East Sussex TN31 6EX